Royal Enfield Meteor 350 vs Yezdi Roadster

Highest power the engine/motor can produce.

The highest twisting force the engine generates, which affects acceleration and pulling power.

Compression ratio is how much the engine squeezes air-fuel before ignition. Higher ratios mean more power; lower ratios improve durability.

Method used to prevent engine overheating.

Design and working of the two-wheeler's engine.

The type of motor used in bikes.

Different performance settings in a two-wheeler.

Engine cylinder capacity measured in cc.

Bore is the diameter of a bike’s engine cylinder. A larger bore allows more fuel-air mix, increasing power and speed.

Distance a two-wheeler covers per liter/charge in city.

Highest power a bike/scooter can produce.

The maximum distance an electric two-wheeler can travel on a full charge.

Stroke is the piston’s movement inside the engine cylinder. Longer strokes give more torque, shorter strokes give more speed and higher RPM.

Number of valves in each engine cylinder.

The system that starts the engine, usually via a key, button, or smart start.

The distance from the center of the front wheel to the center of the rear wheel, affecting stability, handling, and riding comfort.

A tyre with strong sidewalls and better grip, durability, and heat resistance.

(Anti-locking Braking System) Prevents wheel locking during hard braking, improving control and safety.

(Electronic Brakeforce Distribution) This electronic system uses the engine’s resistance to slow down the bike smoothly, reducing excessive brake usage and improving control.

How power is sent to the wheels (e.g., chain, belt, shaft).

The main structure holding the bike together.

The rating which signifies, how well the bike resists water exposure.

A windshield that can be raised, lowered or tilted left/right to improve wind protection and rider comfort.

Distance between the bike’s lowest part and the ground.

Bike’s weight with fuel and fluids.

Distance from the ground to the seat.

Distance from the ground to the seat.

A USB slot to charge devices like phones.

The method to start the bike (e.g., electric start, kick start, or both).

A button to instantly turn off the engine for safety and convenience.

A switch to flash the high beam, signaling other vehicles while overtaking.

A system that prevents wheel slip by adjusting power during acceleration on slippery surfaces.

Indicates the current fuel level in the tank.

The main dashboard displaying speed, fuel, engine stats, and warnings.

Displays the current speed of the bike in km/h or mph.

Estimates how far you can ride before the fuel runs out.

Warns when the battery charge is low and may need recharging or replacement.

Alerts when engine oil is low, preventing damage and ensuring smooth performance.

A device that connects and disconnects the engine from the wheels for smooth gear shifts.

Flashing lights on a two-wheeler that indicate the rider's turning or lane-changing direction.

Energy-efficient, bright rear light.

A warning light when fuel is low.

Total energy the battery can store.

Time for quick battery charging.

A feature that lets you play, pause, or change music via the two-wheeler's console or connected device.

A rating which indicates how well the motor is protected against dust and water.

A feature that provides turn-by-turn directions on the two-wheeler display or connected device.

A companion app to monitor bike stats, location, and settings.

Notifies you of incoming calls or messages on the bike’s screen.

A feature in which rider can set a steady speed without using the throttle.