Kawasaki Ninja 1100SX 2025 vs Triumph Tiger 1200

Highest power the engine/motor can produce.

The highest twisting force the engine generates, which affects acceleration and pulling power.

Compression ratio is how much the engine squeezes air-fuel before ignition. Higher ratios mean more power; lower ratios improve durability.

Design and working of the two-wheeler's engine.

The type of motor used in bikes.

Different performance settings in a two-wheeler.

Engine cylinder capacity measured in cc.

Bore is the diameter of a bike’s engine cylinder. A larger bore allows more fuel-air mix, increasing power and speed.

Highest power a bike/scooter can produce.

The maximum distance an electric two-wheeler can travel on a full charge.

Stroke is the piston’s movement inside the engine cylinder. Longer strokes give more torque, shorter strokes give more speed and higher RPM.

A tyre without an inner tube, reducing puncture risks and maintaining air longer.

The system that starts the engine, usually via a key, button, or smart start.

The distance from the center of the front wheel to the center of the rear wheel, affecting stability, handling, and riding comfort.

A tyre with strong sidewalls and better grip, durability, and heat resistance.

(Anti-locking Braking System) Prevents wheel locking during hard braking, improving control and safety.

(Electronic Brakeforce Distribution) This electronic system uses the engine’s resistance to slow down the bike smoothly, reducing excessive brake usage and improving control.

The overall design and shape of the bike (e.g., cruiser, sports, scooter).

How power is sent to the wheels (e.g., chain, belt, shaft).

The main structure holding the bike together.

The rating which signifies, how well the bike resists water exposure.

A windshield that can be raised, lowered or tilted left/right to improve wind protection and rider comfort.

Distance between the bike’s lowest part and the ground.

Bike’s weight with fuel and fluids.

A support accessory for the passenger’s back.

A component which support foots of the passenger.

Distance from the ground to the seat.

A USB slot to charge devices like phones.

Different settings (e.g., Sport, Eco, Rain) that adjust performance and power delivery.

The method to start the bike (e.g., electric start, kick start, or both).

A button to instantly turn off the engine for safety and convenience.

A switch to flash the high beam, signaling other vehicles while overtaking.

A system that prevents wheel slip by adjusting power during acceleration on slippery surfaces.

A screen that shows important riding information like speed, fuel, and trip details.

Indicates the current fuel level in the tank.

The main dashboard displaying speed, fuel, engine stats, and warnings.

Estimates how far you can ride before the fuel runs out.

Warns when the battery charge is low and may need recharging or replacement.

Reminds when the next bike servicing or maintenance is needed.

A device that connects and disconnects the engine from the wheels for smooth gear shifts.

Energy-efficient, bright rear light.

A warning light when fuel is low.

Total energy the battery can store.

The design of the seat that affects comfort and seating position.

A feature that lets you play, pause, or change music via the two-wheeler's console or connected device.

A rating which indicates how well the motor is protected against dust and water.

A companion app to monitor bike stats, location, and settings.

Notifies you of incoming calls or messages on the bike’s screen.

Alerts you if the bike moves beyond a set location boundary.